Spearviews
Spearviews
SpearViews FreeDivers USA Spring Steel Euro Shaft
- Monday, 26 July 2010 15:11This year at The Blue Wild I was fortunate enough to meet Mike Hickey. I know of Mike from his appearances on Speargun Hunter on the Outdoor Channel with Sheri Daye. Mike was orginally a guest on the show and in later seasons participated as an underwater videographer. Mike is the USA distributor for FreeDivers ( FreeDivers USA ) spearfishing equipment. I came across his booth and after a great conversation about spearfishing, we started discussing the rising cost of spearshafts specifically....
SpearViews March 2009 - Euro 120 Reel
- Saturday, 30 January 2010 08:23It didn't take me long to finish rigging up the 120 with a new reel and 2.2mm dyneema line. Unfortunately as of now (Apr 2009), I haven't had an opportunity to get into the blue water to put this new toy through its paces. I am definitely jones'ing to give it a try! I am also working on making my own flashers for use in blue water. I have been watching these being used on a few spearfishing shows and their reasoning seems sound for their success. They didn't seem too hard to make, so I decided...
SpearViews Oculus R5 GoPro Flat Lens Case
- Sunday, 12 February 2012 23:29{sigplus link=oculusr5 index=1} {/sigplus}Hot on the heels of my review of the GoPro Hero2, I felt I would be remiss if I didn't follow up with a review of the case that resolves the one (and only one in my opinion) flaw in the Hero2 design, it's underwater focus (or lack thereof) flaw. You see, as I wrote about in the Hero2 review the curved lens on the stock case creates a focus fallacy when shooting underwater. It's fairly common knowledge now, so if you want to read about it, you can check...
SpearViews Reef Runner Gear Fin Skins
- Monday, 09 June 2014 16:50Over the winter I looked into and purchased a couple of sets of Reef Runner Gear's fin skins. I had contemplated having my own manufactured but when I came accross these, it just didn't seem worth the hassle. You can create your own custom design for a few bucks more and although you can run into some small snags when doing so (I'll elaborate later on), Jon from Reef Runner Gear is an awesome guy to work with and he will do everything he can to make things right.
SpearViews In the beginning...
- Saturday, 30 January 2010 08:16Throughout my relatively short history in spearfishing (as of this writing), I have only used a few different spearguns. Now obviously, my opinion in this matter is not one of extreme trial and error. Mostly it consists of recommendations made to me by those I spearfish with along with some of my own common sense. In the beginning (early 1990's), I used one of my brother-in-law's extra guns. Specifically, a 38" Arbalette. Now this gun had already seen finer days by the time I started using it....
SpearViews Riffe N.F. Horizontal Reel
- Wednesday, 21 December 2011 15:51I realized recently that I had overlooked the fact that I had purchased and used some new SpearGear at the beginning of the Summer of 2011 and hadn't gotten around to posting about it (here or in SpearGear). This article is going to be one that definitely crosses over between SpearViews and SpearGear because of the fact that I do own it but I definitely think it's worthy of a review as well. In the end, SpearViews won the coin toss deciding where I would put the article (especially after I...
